Is your needle detection 1.0mm?

Yes. All metal product lines pass 1.0mm needle detection as a standard production step, and each batch leaves a detection record.

Can you provide REACH SVHC documentation?

Yes. We supply an SVHC declaration confirming that restricted substances stay below the 0.1% w/w threshold, plus material statements on request.

Do you test nickel release for skin-contact metal parts?

Yes. Nickel release can be tested to EN 1811 by a third-party laboratory for buttons and hardware worn against the skin.

QUALITY & COMPLIANCE

Certified, Tested and Documented

Q: Do you have OEKO-TEX certification?

Yes. We hold OEKO-TEX® STANDARD 100 certification. The certificate number and issuing institute are shared on request so buyers can verify it directly on oeko-tex.com.

European buyers do not take "high quality" as an answer — they ask for the certificate number, the test report and the needle-detection record. We keep all three ready before you ask, so your compliance team can verify everything independently.

OEKO-TEX® STANDARD 100 · REACH SVHC · 1.0mm NEEDLE DETECTION · BATCH TEST REPORTS

QUALITY & CERTIFICATION

Certified. Tested. Documented.

Compliance documents are ready before you ask — because EU buyers always do.

CERTIFIED

OEKO-TEX® STANDARD 100

Tested for harmful substances to human-ecological safety standards. Certificate number and issuing institute are shared on request, so your compliance team can verify directly on oeko-tex.com.

IN-HOUSE QC

Needle Detection & Batch Testing

All metal product lines pass 1.0mm needle detection. Pull strength, torque and plating thickness are tested per batch, with REACH-compliant materials and test reports available.

DOCUMENTATION

What Ships With Your Order

Every shipment leaves with a full compliance file. Ask for any of the documents below at quotation stage and we will send a sample set.

OEKO-TEX® STANDARD 100 Certificate

Certificate number and issuing institute, so your compliance team can verify it directly on oeko-tex.com.

REACH SVHC Statement

Declaration that the goods contain no restricted substances above the 0.1% w/w threshold.

Needle-Detection Record

Batch record confirming that every metal piece passed 1.0mm needle detection before packing.

Plating Thickness & Salt-Spray Report

Measured plating thickness in microns plus salt-spray hours for the finish on your order.

Pull-Strength & Torque Test

Attachment strength results for shank, snap, jeans buttons and rivets, tested per production batch.

Inspection Report & Packing List

Pre-shipment inspection summary, carton breakdown, gross and net weight for your forwarder.

STANDARDS

Which Standards Apply to Buttons

Different markets ask for different evidence. These are the standards that come up most often on button and hardware orders.

Compliance standards commonly requested on button and garment hardware orders
Standard	Applies to	Evidence we can provide
OEKO-TEX® STANDARD 100	All product lines	Certificate number and issuing institute, verifiable on oeko-tex.com
REACH SVHC (0.1% w/w)	All product lines	SVHC declaration and material statements
Nickel release (EN 1811 / EN 12472)	Metal parts worn against skin	Test report from a third-party laboratory
Needle detection (1.0mm)	All metal parts	Per-batch needle-detection record
Azo dyes & formaldehyde	Plastic, natural and coated parts	Test report or raw-material declaration
Pull strength / torque	Shank, snap, jeans buttons and rivets	In-house per-batch test data

Ask for the full compliance file.

Request the certificate, the test reports and a sample document set before you place the order — we would rather answer compliance questions now than after shipment.

Request a Quote